• Had a number of recent projects this week that have been working the printer quite a bit.  Not only am I working on my first printing and painting video, but I have been collecting a number of time lapse videos for other projects.  The wife also tasked me with me with making a Boy Scout […]

  • After reviewing a number of tutorials on YouTube video creation, I ended up ordering an Amazon branded microphone stand, as an impromptu camera stand.  This is a cheap option, and my concern was its ability to support and handle the weight of a camera.  It arrived, and after some testing, I am rather happy with […]

  • In our latest session, the group continued the mystery of the dwarven Vekker brothers, and what fate they found some 70 years prior in the mountains.  Previously, they had discovered the lost mining base station, which was inhabited by ghosts and spirits, and had fallen into the hunting ground of a wendigo.  This time, with […]

  • Still struggling to find a format for the creation of YouTube content, after numerous challenges and setbacks.  I have found that game play videos are simply too long and involved to make good content – they are rather dull to watch, take forever to edit down, and I don’t have the gear to make them […]

  • Decided to test the limits of the printer, and attempt to print a custom gaming miniature.  In this case, it is a paladin, wielding a sword and beer.  Resolution was set for 0.1mm, and there was a lot of support material, but overall I am happy with the quality.  The picture certainly highlights the roughness […]

  • A second print for terrain for Star Wars: Legion, this was a long one coming in at 27 hours with a resolution of 0.15mm.  Model is by SableBadger, hosted on Thingiverse at https://www.thingiverse.com/thing:2894409, specifically model #3.  As before, pictured with a Pathfinder figure for scale.  The print turned out very nice, though there was a […]

  • Taking advantage of my recently leveled printer bed to print out some terrain pieces for use in Star Wars: Legion.  First up in a power generator, using the design by Sablebadger on Thingiverse.  This is printed in my normal grey PLA, with a 0.15 mm layer height and 10% infill.  I didn’t have any stormtroopers […]

  • As anyone who has used a 3d printer knows, leveling your print bed (aka Tramming – aligning the flat print surface so it is equidistant from the print head at all times and locations) is one of the most critical steps to setup and to insure a well produced part.  In my experience, it has […]

Disclaimers and Legalese

This website uses trademarks and/or copyrights owned by Paizo Inc., which are used under Paizo’s Community Use Policy. We are expressly prohibited from charging you to use or access this content. This website is not published, endorsed, or specifically approved by Paizo Inc. For more information about Paizo’s Community Use Policy, please visit paizo.com/communityuse. For more information about Paizo Inc. and Paizo products, please visit Paizo.com.